SERVSWITCH™
80
Appendix A: NVRAM Factory Defaults
A.1 Keyboard-Command Settings
The tables below shows, for the ServSwitch’s keyboard-command configuration
options, the default values stored in nonvolatile memory (NVRAM) when the
ServSwitch is shipped from the factory. It also shows what commands or actions can
change these settings for the Switch’s current operating period, as well as what
commands or actions (if any) can save changed settings to NVRAM, so that they
become the new defaults.
Option Factory-Default Setting To Change
To Save
Changes
Caps/Scroll/
Num Lock
Num Lock ON (fixed)
Select port, then press the
corresponding button on the
keyboard
Can’t be
saved
Scan OFF Type [Ctrl] S (to turn ON) or
[Ctrl] X (to turn OFF)
Can’t be
saved
Screen-Saver
Delay Time
0 (disabled)
Type [Ctrl] Vxcx [Enter]
(xxx = any 1- to 3-digit number,
time in seconds, or 0 to disable)
[Ctrl] K
To Next Page
Loading...
