Black Box ServSwitch SW724A-R5 - On-Screen Configuration Settings

APPENDIX A: NVRAM Facory Defaults
81
A.2 On-Screen Configuration Settings
The table below and on the next page shows, for the ServSwitch’s saveable onscreen
display options, the default values stored in nonvolatile memory (NVRAM)
when the ServSwitch is shipped from the factory.
Option Default setting
System
Keyboard …………………………. PC 104/105
Mouse …………………………….. PS/2
Maximum computers ……………...2-port models: 4;
Other models: No. of ports on unit
Expansion units ............................... 0
Expansion width .............................. 16
Scan time ........................................ 5 seconds
Scan mode ...................................... Off
Power-On Scan ............................... Off
Typematic rate ……........................ 20 characters per second
Typematic delay............................... Fast
Computer
Computer name ............................... Computer n (n = CPU-port number)
Computer keyboard ......................... PC2 (PC mode 2)
Computer mouse.............................. PS/2 (non-wheel)
Overlay
Color scheme................................... Aquarium
Resolution ....................................... PC1 (640x480 at 60 Hz)
Screen saver .................................... Fireflies
Screen-saver timeout ....................... 600 seconds (10 minutes)
Computer-select window
Background color............................. Transparent blue
Text color......................................... White
Position............................................ X=3, Y=3