3. If necessary, turn on the switch.
4.
Tap > Saved networks.
5. Tap a network.
6. Tap Forget.
View saved Wi-Fi networks
When you connect your device to a Wi-Fi network, your device automatically saves the information required to connect to
the network. When you are within range of a saved Wi-Fi network, your device automatically tries to connect to it. This is
useful when you frequently move between Wi-Fi networks, such as your home Wi-Fi network and the Wi-Fi network at work.
1. Swipe down from the top of the screen once using two
fingers, or twice using one finger.
2.
Tap > Wi-Fi.
3. If necessary, turn on the switch.
4.
Tap > Saved networks.
Write Wi-Fi connection information to an NFC tag
Turn on NFC on your device.
By writing Wi-Fi connection information to an NFC tag, you can allow others to connect to a password-protected Wi-Fi
network with a simple tap of a device. This is helpful, for example, if you want to let guests use your home Wi-Fi network
when they visit.
If the Wi-Fi network requires a username and password, for example, a Wi-Fi network at work, you can't write the Wi-Fi
connection information to an NFC tag.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > Wi-Fi.
3. If necessary, turn on the switch.
4.
Tap > Saved networks.
5. Touch and hold a network name.
6. Tap Write to NFC tag.
7. Align the back of your device to an NFC tag, and then tap your device on the tag.
Set a static IP address for your Wi-Fi connection
By default, when you connect your device to a Wi-Fi network, your device assigns a local network assigned IP address to
the connection. You can set a static IP address that doesn't change each time you connect to a Wi-Fi network.
You must be within range of the Wi-Fi network to change the Wi-Fi settings.
User Guide Settings
80
To Next Page
Loading...
