Blackberry PRIV - Page 81

1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > Wi-Fi.
3. If necessary, turn on the switch.
4. Tap and hold a network.
5. Tap Modify network.
6. Select the Advanced options checkbox.
7. In the IP settings drop-down list, tap Static.
8. Change the IP address
fields.
9. Tap Save.
Change advanced settings for your Wi-Fi connections
You can change advanced settings for your Wi-Fi connections. For example, you can set whether your Wi-Fi connection
remains active when your device sleeps and you can change the Wi-Fi frequency band. You can also find the Media Access
Control (MAC) address and IP address for your device.
1. Swipe down from the top of the screen once using two fingers, or twice using one finger.
2.
Tap > Wi-Fi.
3. If necessary, turn on the switch.
4.
Tap > Advanced.
Advanced Wi-Fi connection settings
Setting Description
Network notification Turn on this switch to receive a notification when your device is within range of a
public Wi-Fi network.
Scanning always available Turn on this switch to allow location services and apps to scan for Wi-Fi
networks even when Wi-Fi is turned o.
Keep Wi-Fi on during sleep Tap this option to choose whether your device remains connected to the Wi-Fi
network when your device sleeps. If you turn o your Wi-Fi connection when
your device sleeps, you might increase the amount of mobile data you use.
Wi-Fi frequency band Tap to set the frequency band. When you set the band to 5.0 GHz, your device
connects to access points on the 5.0-GHz band only. When set to 2.4 GHz, your
device connects to access points on the 2.4-GHz band only. When set to
automatic, your device tries to connect to the band with the stronger signal
strength.
User Guide Settings
81