BLADDERSCAN BVI 3000 - Procedure 2. Set the Date

To Next Page

To Previous Page

Operations & Maintenance Manual: Setting Up

PROCEDURE 2. SET THE DATE

Once set, the BVI 3000 clock recognizes the number of days in each month, including February during leap

years. It has its own lithium battery and maintains the correct date and time for at least ten years, even if the

rechargeable battery is removed.

This procedure uses the month/day/year format for the date setting. If you would like to change the date format,

see the procedure Adjust User Preferences on page 21.

1. Turn the BladderScan BVI 3000 on by pressing the power button.

2. On the Main Menu screen, press the ALT button.

BVI 3000

SCAN ALT

VERATHON

PRINT NOTES

13:2705/22/14

3. If you are prompted, enter your PIN code.

Note: The default PIN code is 0000. For information about how to change the PIN code, see the procedure

Adjust User Preferences on page 21.

4. On the Alternate Menu screen, press the DATE button.

NAME TIMEDATE

VERATHON Corporation

VER: 3.020 (D949)

Box ID: 00001965

PREF

SELF

TEST

5. On the Date Preset screen, press the





button to toggle between increasing or decreasing the month

number, and then press the MM button until the correct month is displayed.

Note: Only values from 01 to 12 are allowed.

05/22/14







DONE