44
PROCEDURE 4. CLEAR A PAPER JAM
If the paper jam is inaccessible, do not try to disassemble the printer. Contact your authorized Verathon
®
Service Center or your local Verathon distributor for service.
IMPORTANT
1. On the right side of the instrument, next to the paper roll well, lower the printhead release lever.
2. While moving the manual paper‑feed wheel counterclockwise, gently pull the paper backward until the paper
jam is cleared and the paper roll is free of the instrument.
3. Turn the printhead release lever so that it is pointing to 10 o'clock.
4. Trim any damaged paper off of the paper roll.
5. Ensure that the new end of the paper roll is cut straight. Do not fold the end of the paper roll, cut it
diagonally, or cut it to a point.
6. Reload the paper roll according to the instructions in the procedure Load The Thermal Paper Roll on
page 14.
To Next Page
Loading...