BLADDERSCAN BVI 3000 - Procedure 5. Test the Printer

45
Operations & Maintenance Manual: Maintenance & Troubleshooting
PROCEDURE 5. TEST THE PRINTER
Select this option to test if the built‑in thermal printer works. The instrument will print alphanumeric characters
and a simple grayscale test pattern.
1. Ensure a paper roll has been inserted into the instrument according to the instructions in the procedure Load
The Thermal Paper Roll on page 14.
2. On the Main Menu screen, press the PRINT button.
BVI 3000
SCAN ALT
VERATHON
PRINT NOTES
13:2705/22/14
3. On the Print screen, press the SEL button until TEST PRINT is selected.
PRINT SEL DONE
TEST PRINT
COST SAVING
LAST IMAGE
X
4. Press the PRINT button. The instrument begins printing.
Note: Printing takes approximately one minute.
PRINT SEL DONE
TEST PRINT
COST SAVING
LAST IMAGE
X