BLADDERSCAN BVI 3000 - Procedure 3. Set the Time

19
Operations & Maintenance Manual: Setting Up
PROCEDURE 3. SET THE TIME
The internal clock is accurate to better than one minute per month at 25°C (77°F). It will operate for at least
10 years from an internal lithium battery. Enter the time in 24‑hour format (also known as military time).
To convert 12‑hour clock time to 24‑hour format, if the time is after noon, add 12 hours to the clock time
(Example: 3:00 PM + 12 hours = 15:00).
1. Turn the BladderScan BVI 3000 on by pressing the power button.
2. On the Main Menu screen, press the ALT button.
BVI 3000
SCAN ALT
VERATHON
PRINT NOTES
13:2705/22/14
3. If you are prompted, enter your PIN code.
Note: The default PIN code is 0000. For information about how to change the PIN code, see the procedure
Adjust User Preferences on page 21.
4. On the Alternate Menu screen, press the TIME button.
NAME TIMEDATE
Copyright 2013 by
VERATHON Corporation
VER: 3.020 (D949)
Box ID: 00001965
PREF
SELF
TEST
5. On the Time Preset screen, press the HH

button to decrease the hour value, or press the HH

button to
increase the hour value.
13:27
HH

HH

MM

MM

DONE