BLADDERSCAN BVI 3000 - Procedure 3. Print the Scan Result (Optional)

34
PROCEDURE 3. PRINT THE SCAN RESULT (OPTIONAL)
You may access the Print screen from either the Main Menu screen or the Scan Results screen. For information
about adjusting the scan information that appears on the printout, see the procedure Adjust User Preferences on
page 21.
Note: If you have enabled the QUICK setting in user preferences, you cannot access the Print screen from the
Scan Results screen. If you are on the Scan Results screen and you press the PRINT button, the instrument
automatically prints the scan results without displaying the Print screen.
Figure 11. Print Screen
PRINT SEL DONE
TEST PRINT
COST SAVING
LAST IMAGEX
Note: If the facility name, date, and time
have not been set, those lines will
not be included on the printout.
Figure 12. Printout of Scan Results
BladderScan (tm)
VERATHON
MALE
132 ml
05/27/14 08:55
Patient name:
Patient ID:
Procedure code:
Signature:
Probe: 21308 Box: 00001965
VER: 3.020 D949
Longitudinal axis
Area = 21 cm
2
Horizontal axis
Area = 21 cm
2
1. On the Print screen, ensure that LAST IMAGE is selected. If necessary, press the SEL button in order to
select LAST IMAGE.
2. Press the PRINT button.
Note: Printing takes approximately one minute.
PRINT SEL DONE
TEST PRINT
COST SAVING
LAST IMAGEX