31
Operations & Maintenance Manual: Using the Instrument
MANAGING SCAN RESULTS
PROCEDURE 1. ADD A PATIENT ID NUMBER (OPTIONAL)
A patient ID number (maximum 10 digits) can be added to the scan result and will be included on the printout.
You may access the Patient ID Number screen from the Scan Results screen. The Patient ID Number screen
displays 0000000000.
Note: Only press the button marked # when a patient ID number is required. If the # button is used and no
patient ID number is entered, the instrument assumes a patient ID number was entered, and 0000000000 will
be included on the printout.
1. Using the left and right buttons, select the digit you want to change (the selected digit is underlined).
+
ONE
00000000000
2. Using the plus + or minus – buttons, increase or decrease the value in order to select the correct digit.
+
ONE
00000000001
3. Repeat Step 1 through Step 2 until you have entered the complete patient ID number.
4. When you have nished entering the patient ID number, press the DONE button.
The instrument returns to the Scan Result screen, and the patient ID number you entered will now be
included on the printout of the scan.
+
ONE
00000875421
To Next Page
Loading...