22
PARAMETER RANGE OR VALUE DESCRIPTION
Contrast Adjust 30–63 (default is 57)
Adjust display contrast ratio; the higher the value, the
darker the background
Note: An immediate effect is seen only when adjusting the
contrast up. Adjusting the contrast down becomes visible
when the instrument is turned off and on again.
Currency
$ Set the currency for calculating cost savings to dollars
€ Set the currency for calculating cost savings to euros
₤ Set the currency for calculating cost savings to pounds
¥ Set the currency for calculating cost savings to yen
Scan count screen —
Reset the user‑controllable scan counter to zero.
Note: There are two scan counters in the BVI 3000. One
may be reset by users, and the other may only be reset
by an authorized Verathon representative.
Reset histogram —
Reset the histogram to being a new analysis of cost
savings
Change PIN code —
Change the PIN code. The current PIN is displayed. Enter
the desired PIN, and then press DONE.
If you change the PIN code, ensure that you record or remember it. If your existing PIN code is lost or
forgotten, you must contact Verathon
®
Customer Care in order to reset it.
IMPORTANT
1. Turn the BladderScan BVI 3000 on by pressing the power button.
2. On the Main Menu screen, press the ALT button.
BVI 3000
SCAN ALT
VERATHON
PRINT NOTES
13:2705/22/14
3. If you are prompted, enter your PIN code.
Note: The default PIN code is 0000.
To Next Page
Loading...