6 CARING FOR AND CLEANING YOUR
•
INSTANT PYROLYTIC
CLEANING
To take advantage
of the
volume
of
heat
already
built up in the
oven and
thus
save
energy:
Star
t a pyrolysis cycle
af
ter a cooking pro-
gramme.
Remove
the
accessories
from the oven and
clean any major
spill residue.
Ensure
that the
programmer displays
the time
of
day and
that it is not
flashing
(fig.1).
Simply position your
cooking
selector
on the
“Pyrolysis”
position or on the
“ECO
Pyroly-
sis” (fig.1).
The Pyr
on
the display will tell you
that
you
are
in a
self-cleaning cycle
or
P-E
in an ECO
self cleaning
cycle.
During
the
self-cleaning cycle,
a padlock symbol
appears
on
the display,
to
tell you
that
the
door is
locked.
When
the
padlock has disappeared
from the dis-
play,
the door
can be
opened.
The oven
is
unavailable
for
2.5 hours
(two hours
of
pyrolysis
and 30
minutes
of cooling) during
“Pyrolysis”
or for two hours
(1.5
hours of pyrol-
ysis and 30 minutes
of
cooling) during “ECO
Py-
rolysis” (this
duration
is not modifiable).
This time includes the cooling time until the
door can be unlocked.
•
END OF
CLEANING
Pyrolysis
stops
automatically;
it is then possible
to
open
the door.
At the
end
of the
pyrolysis cycle,
the
display
indi-
cates
0:00.
Return the function selector to the 0 position.
(fig.3).
fig.1
fig.2
fig.3
When
the oven is cool, use a damp cloth to re-
move the white
ashes.
The oven is clean and
once
again ready
for the cooking
application
of
your choice.
Important
The
door effectively locks a few minutes after the start of the cycle.
Pyrolysis stops
automatically.
When the temperature reaches approximately 275°C, it is
then possible to open the door.
To Next Page
Loading...
