EN 1
/
SAFET
Y INSTRUCTIONS
—
Do not use
abrasive cleaning
products or hard metal scrapers
for
cleaning
the
oven's
glass door, as they could scratch the sur-
face and
cause
the glass to shatter.
—
To
clean
both the
electronic programmer
window and the oven
door, use a soft cloth.
—
Do not use
cleaning
products,
abrasive creams
or scouring
sponges.
Warning:
Make
sure the
appliance
is disconnected from the power before
replacing the lamp in order to avoid the risk of electric shock.
Change
the lamp only when the appliance has cooled down. To
unscrew the view port and the light, use a rubber glove, which
will make
disassembly
easier.
Warning :
Installation should only be performed by qualified installers and
technicians.
Warning :
The
electrical plug must remain accessible after installation.
It must be possible to disconnect the appliance from the power
supply, either using a plug or by fitting a switch on the fixed
wiring system in accordance with installation rules.
If the power cable is
damaged,
it should be replaced by the man-
ufacturer, its after-sales service department or by a similarly
qualified person in order to avoid danger.
To Next Page
Loading...
