5
Description of your oven
The oven shelf positions are numbered 1 – 5 from the bottom up to the top.
1.
Function Select knob
2.
Display and clock sensors
3.
Thermostat Control knob
Below the digital display there are 3 control sensors.
When removing the rack, pull partial out until the stop is felt. Angle
slightly upwards & pull forward until the rack is over the stop. The
rack can now be fully removed. Replacement of the rack is the
same but in reverse.
NOTE: Before using for the first time, run the empty oven for 45
minutes on the Fan Force function to burn off any oils used during
manufacture. Do this in a well ventellated room.
To Next Page
Loading...
Need help?
General
