8
Special Functions
Minute Minder
The Minute Minder is an alarm that can be set up as a reminder, but does not affect any of the cooking
functions. With out without a cooking function running, press the + or – button until the Minute Minder
symbol (bell) starts to flash. Press the centre button (clock), and 00:00 will be displayed (the current
Minute Minder value). Press the + & - buttons until the correct value is displayed (hours & minutes), then
press the centre button again to set (0-23.59). The Display will show the countdown and the Minute
Minder symbol will flash. When the value reached 00:00, an alarm will sound. Press any button to stop
the alarm and the display will revert to the current time. The value can be adjusted at any time in the
same manner. To cancel, adjust the time to 0.
Cooking Duration
Setting a Cooking Duration will allow the cooking function to run for a set length of time and then turn off.
Set up a cooking function as required. Press the + or – button until the Cooking Duration symbol (arrow
with 2 lines) starts to flash. Press the centre button (clock), and 00:00 will be displayed (the current
Cooking Duration value). Press the + & - buttons until the correct value is displayed (hours & minutes),
then press the centre button again to set (0-23.59). The Display will show the countdown and the
Cooking Duration symbol will flash. When the value reaches 00:00, an alarm will sound for 1 minute and
the cooking function will stop. Press any button to stop the alarm and the display will revert to the current
time. Turn off the cooking function and set the thermostat control to 0. The value can be adjusted at any
time in the same manner. To cancel, adjust the time to 0. The cooking function and thermostat setting
can be adjusted at any time without affecting the Cooking Duration.
Cooking End Time
Setting a Cooking End time will allow the cooking function to run until a particular time and then turn off.
Set up a cooking function as required. Press the + or – button until the Cooking End Time symbol (arrow
with 1 line) starts to flash. Press the centre button (clock), and the current time will be displayed. Press
the + & - buttons until the cooking end time is displayed (hours & minutes), then press the centre button
again to set. Note that the Cooking End Time can be set for 23 hours and 59 minutes in the future, but
this should only be used if there is no chance of food spoilage. The Display will show the countdown and
the Cooking End Time symbol will flash. When the time has been reached, an alarm will sound and the
cooking function will stop. Press any button to stop the alarm and the display will revert to the current
time. Turn off the cooking function and set the thermostat control to 0.The value can be adjusted at any
time in the same manner. To cancel, adjust the time to 0. The cooking function and thermostat setting
can be adjusted at any time without affecting the Cooking End Time.
Automatic Cooking
Automatic cooking allows you to set up the end cooking time and cooking duration at the same time,
which effectively is a delayed cooking start time. Set up a cooking function as required. First follow the
instructions to set up the Cooking End Time. When completed, start setting up the Cooking Duration as
per the instructions. Note that the cooking duration will initially show the difference between the cooking
end time and the current time. Adjust this duration down to the desired length, and set. The oven
function will turn off and the diplay will show the current time and both the Cooking Duration symbol and
the Cooking End Time symbol.When the cooking duration = end cooking time-current time, the oven
function will turn on, the Cooking End Time symbol will turn off, the Cooking Duration symbol will start to
flash and the display will show the countdown as per the Cooking Duration. When the value reaches
00:00, an alarm will sound for 1 minute and the cooking function will stop. Press any button to stop the
alarm and the display will revert to the current time. Turn off the cooking function and set the thermostat
control to 0.
To Next Page
Loading...
Need help?
General
