Blaupunkt 530 Series User Manual

49
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation
menu.
2. In the Navigation menu, tap
.
3. Open the
menu and tap .
4. You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
5. (optional) If necessary, tap
then and enter
the coordinate in UTM format.
6. When finished, tap
.
7. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the new
location. Tap
to confirm the destination, or tap
to select a different destination.

Blaupunkt 530 Series Specifications

General

Aspect Ratio	16:9
Resolution	800 x 480 pixels
Touchscreen	Yes
Radio	FM/AM
Bluetooth	Yes
USB Port	Yes
AUX Input	Yes
SD Card Slot	Yes
Video Playback	Yes
Remote Control	Yes
Video System	PAL/NTSC
Power Supply	12V DC
Power Consumption	10W