78
Gives a quick but fuel efficient route based on the fuel consumption
data given in Green Routing settings (page 78). Travel cost and CO
2
emission calculations are estimations only. They cannot take
elevations, curves and traffic conditions into account.
Results in a route with fewer turns and no difficult manoeuvres. With
this option, you can make Blaupunkt Navigation to take, for example,
the motorway instead of a series of smaller roads or streets.
4.3.5 Green routing settings
These settings determine how Green routes will be calculated. They are also used to display
the cost and CO
2
emission of routes.
Button Description
Enter the average consumption of your vehicle when used in built-up
areas. If necessary, tap
and select
to change the measurement unit.
Enter the average consumption of your vehicle when used on
highways. If necessary, tap
and select
to change the measurement unit.
Select the engine and fuel type of your vehicle. This helps in
estimating the CO
2
emission.
Enter the average fuel price for travel cost calculation. If necessary,
tap
and select to change
the currency.
If the selected routing method is not Green, you can have your route
compared to the best green alternative on the screen when
confirming the route. If this alternative is much better than the
selected method, you can quickly switch to Green mode.
To Next Page
Loading...
Need help?
General
