42
Setting the speed-dependent
volume adjustment (GALA)
This function automatically adjusts the vol-
ume of the car sound system to the speed
driven and the associated driving noises.
For example, at an increased speed, the
volume is automatically increased to com-
pensate for the increased driving noise
(e.g. due to airstream).
For this purpose, the vehicle must provide
the speedometer signal and the car sound
system must be connected accordingly.
You can adjust the automatic volume in-
crease in 6 increments (OFF, 1-5).
Press the MENU button 7.
Press the
or button 8 repeated-
ly until "GALA" appears on the display
with the current setting.
Press the
or button 8 to adjust
the volume adjustment between "OFF"
and 5.
To exit the menu,
press the MENU button 7.
쏅
쏅
쏅
쏅
Sound
Adjusting the treble
Press the AUD button :.
Press the
or button 8 repeat-
edly until "TREBLE" appears.
Press and hold down the
or button
8 for longer than 2 seconds.
"FREQ" and the currently set treble fre-
quency appear briefl y on the display.
To select a different treble frequency be-
tween 10.0 kHz and 17.5 kHz,
press the
or button 8.
To adjust the treble,
press the
or button 8 repeat-
edly until "GAIN" appears.
After approx. 2 seconds, "GAIN" and the
current setting are shown on the display.
Press the
or button 8 to adjust
the treble between –7 and +7.
To exit the menu,
press the AUD button :.
Adjusting the bass
Press the AUD button :.
Press the
or button 8 repeat-
edly until "BASS" appears.
Press and hold down the
or button
8 for longer than 2 seconds.
"FREQ" and the currently set bass frequen-
cy appear briefl y on the display.
To select a different bass frequency be-
tween 60 Hz and 200 Hz,
press the
or button 8.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Volume Sound
02_CalaisMP48_gb.indd 4202_CalaisMP48_gb.indd 42 11.06.2008 15:12:27 Uhr11.06.2008 15:12:27 Uhr
To Next Page
Loading...
Need help?
General
