EasyManua.ls Logo

Blaupunkt Calais MP48 - Adjusting the Middle; Adjusting the Left;Right Volume Distribution (BAL); Adjusting the Front;Rear Volume Distribution (FAD)

Blaupunkt Calais MP48
282 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
ENGLISH
To adjust the quality factor for the middle,
press the
or button 8 repeat-
edly until "Q-FACTOR" appears.
After approx. 2 seconds, "Q" and the cur-
rent setting are shown on the display.
Press the
or button 8 to adjust
the quality factor between 0.5 and
1.25.
To exit the menu,
press the AUD button :.
Adjusting the left/right volume
distribution (BAL)
Press the AUD button :.
Press the
or button 8 repeat-
edly until "BAL" appears on the display
with the current setting.
Press the
or button 8 to adjust
the left/right volume distribution be-
tween –10 and +10.
To exit the menu,
press the AUD button :.
Adjusting the front/rear volume
distribution (FAD)
Note
The rear loudspeakers must be con-
nected via an additional amplifi er.
Press the AUD button :.
Press the
or button 8 repeat-
edly until "FAD" appears on the display
with the current setting.
Press the
or button 8 to adjust
the front/rear volume distribution be-
tween –10 and +10.
To exit the menu,
press the AUD button :.
To adjust the bass level,
press the
or button 8 repeat-
edly until "GAIN" appears.
After approx. 2 seconds, "GAIN" and the
current setting are shown on the display.
Press the
or button 8 to adjust
the bass level between –7 and +7.
To adjust the quality factor for bass,
press the
or button 8 repeat-
edly until "Q-FACTOR" appears.
After approx. 2 seconds, "Q" and the cur-
rent setting are shown on the display.
Press the
or button 8 to adjust
the quality factor between 1.0 and
2.0.
To exit the menu,
press the AUD button :.
Adjusting the middle
Press the AUD button :.
Press the
or button 8 repeat-
edly until "MIDDLE" appears.
Press and hold down the
or but-
ton 8 for longer than 2 seconds.
"FREQ" and the currently set centre fre-
quency appear briefl y on the display.
To select a different centre frequency be-
tween 500 Hz and 2.5 kHz,
press the
or button 8.
To adjust the middle level,
press the
or button 8 repeat-
edly until "GAIN" appears.
After approx. 2 seconds, "GAIN" and the
current setting are shown on the display.
Press the
or button 8 to adjust
the middle level between –7 and +7.
Sound
02_CalaisMP48_gb.indd 4302_CalaisMP48_gb.indd 43 11.06.2008 15:12:28 Uhr11.06.2008 15:12:28 Uhr

Table of Contents

Related product manuals