EasyManua.ls Logo

Blaupunkt CCU 02 MP3 PROFESSIONAL - Voice Output and Navigation Mix

Blaupunkt CCU 02 MP3 PROFESSIONAL
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Press the AUD button G for cockpit.
Select "
*
MORE" with the left rotary/
pushbutton I.
Press the left rotary/pushbutton I.
The display shows "CODE".
Press the left I and the right rotary/
pushbutton : at the same time for
confi rmation until a beep sounds.
Select "
*
SET VOL" with the left rotary/
pushbutton I.
Press the left rotary/pushbutton I.
Select "PHONE" with the left rotary/
pushbutton I.
Press the left rotary/pushbutton I.
Adjust the desired volume with the left
rotary/pushbutton I.
Hold the ESC J button pressed until a
beep sounds and the menu is exited.
Phone mix
During a telephone call, the audio source
can be listened to in the background.
To adjust the ratio of telephone to audio
volume,
press and turn the left rotary/pushbut-
ton I during a telephone call.
The value is stored.
Playback of voice output
(navigation)
If your device is connected to a navigation
system, the device is muted during a voice
output. The CCU 02 uses the system spea-
kers in the cockpit for the voice output.
For this purpose, the navigation system must
be connected to the device accordingly.
The base volume for voice output can be ad-
justed (CPA 121 system amplifi er only):
Press the AUD button G for cockpit.
Select "
*
MORE" with the left rotary/
pushbutton I.
Press the left rotary/pushbutton I.
The display shows "CODE".
Press the left I and the right rotary/
pushbutton : at the same time for
confi rmation until a beep sounds.
Select "
*
SET VOL" with the left rotary/
pushbutton I.
Press the left rotary/pushbutton I.
Select "NAV" with the left rotary/push-
button I.
Press the left rotary/pushbutton I.
Adjust the desired volume with the left
rotary/pushbutton I.
Hold the ESC J button pressed until a
beep sounds and the menu is exited.
Navigation mix
During a voice output, the audio source can
be listened to in the background.
To adjust the ratio of voice output and audio
volume,
press and turn the left rotary/pushbut-
ton I during a voice output.
The value is stored.
Adjusting the volume
02_CCU02MP3Prof_eng.indd 5002_CCU02MP3Prof_eng.indd 50 16.08.2006 14:48:57 Uhr16.08.2006 14:48:57 Uhr

Table of Contents

Related product manuals