Blaupunkt CCU 02 MP3 PROFESSIONAL - Sound Settings and Equalization; Bass, Treble, Balance, and Fader Adjustment

53
ENGLISH
Adjusting the sound
You can set the sound properties separately
for the cockpit and the cabin area.
Adjusting the bass
To adjust the bass for the cockpit or the
cabin area,
press the AUD button G for cockpit or
AUD button 8 for the cabin area.
"BASS" is displayed.
Press the left I or right rotary/push-
button : for cockpit or cabin.
The current value is displayed.
To change the value,
turn the left I or right rotary/push-
button : for cockpit or cabin.
To exit the menu,
hold the ESC button J for the cockpit
area or the ESC button ; for the cabin
area pressed until a beep sounds and
the menu is exited.
Adjusting the treble
To adjust the treble for the cockpit or the
cabin area,
press the AUD button G for cockpit or
AUD button 8 for the cabin area.
"BASS" is displayed.
Turn the left I or right rotary/push-
button : for cockpit or cabin until
"TREBLE" is displayed.
Press the left I or right rotary/push-
button : for cockpit or cabin.
The current value is displayed.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the sound
To change the value,
turn the left I or right rotary/push-
button : for cockpit or cabin.
To exit the menu,
hold the ESC button J for the cockpit
area or the ESC button ; for the cabin
area pressed until a beep sounds and
the menu is exited.
Adjusting the balance (Cockpit)
To adjust the left/right volume distribution
(balance) for the cockpit,
press the AUD button G for cockpit.
"BASS" is displayed.
Turn the left rotary/pushbutton I un-
til "BALANCE" is displayed.
Press the left rotary/pushbutton I.
The current value is displayed.
To change the value,
turn the left rotary/pushbutton I.
To exit the menu,
hold the ESC J button pressed until a
beep sounds and the menu is exited.
Adjusting the fader (Cabin)
To adjust the left/right volume distribution
(fader) for the cabin (for CPA 121 system
amplifi er only),
press the AUD button 8 for cabin.
"BASS" is displayed.
Turn the right rotary/pushbutton :
until "FADER" is displayed.
Press the right rotary/pushbutton :.
The current value is displayed.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_CCU02MP3Prof_eng.indd 5302_CCU02MP3Prof_eng.indd 53 16.08.2006 14:48:57 Uhr16.08.2006 14:48:57 Uhr