47
ENGLISH
ception. If two additional video sources
are connected, an audio/video selector
switch is required.
TravelPilot Coach Professional
for navigation and display of the naviga-
tion map as well as to display CCU 02
displays.
CLX LCD monitor
to display up to 3 back-up cameras, the
navigation, video signal and display of
the settings of the CCU 02 in conjunc-
tion with the TravelPilot Coach Profes-
sional (only suitable for integration in
the instrument panel).
Menus of the CCU 02
Many settings (e.g. AUD, DSC) at the CCU
02 are performed by means of menus. An
overview of all menus of the CCU 02 is lo-
cated on the last page of these instructions
in the chapter on "Menus". To display the
menus requires connecting an additional
separate device such as the CVX 02 or a
TravelPilot Coach Professional with moni-
tor/CLX.
Navigating in menus
After calling up a menu, use the rotary/
pushbuttons I and : to move the selec-
tion mark in the menus. To call up or change
menus, press the respective rotary/push-
button I or :.
Submenus
To provide a more convenient mode of op-
eration, several menus are divided into
submenus. Menu items with submenus are
identifi ed with an asterisk symbol "
*
".
•
•
Protected menus (CODE)
To prevent unauthorised users from changing
settings, some menu items are protected.
In this case, "CODE" is displayed after se-
lecting the menu item.
If "CODE" is displayed, press both rotary/
pushbuttons I and : at the same time
for confi rmation until a "beep" sounds.
Time out
If no additional operation is performed, an
open menu is automatically hidden again
after approx. 8 seconds.
Note:
Since the operation switches from the
cabin to the cockpit area after 10 sec-
onds, it may be necessary to push the
rotary/pushbutton twice to select the
cabin menu.
Notes and accessories
02_CCU02MP3Prof_eng.indd 4702_CCU02MP3Prof_eng.indd 47 16.08.2006 14:48:56 Uhr16.08.2006 14:48:56 Uhr
To Next Page
Loading...
