Blaupunkt HAMBURG MP57 - Bluetooth preparation; How is a Bluetooth connection established?; Activating the Bluetooth function (BT ON)

98
AUX mode
"AUX ON ": The corresponding au-
dio input is activated and can be se-
lected as audio source using the
SOURCE button
>
"AUX OFF": The audio input is de-
activated and cannot even be select-
ed as audio source with the SOURCE
button
> if an external audio source
is connected.
Renaming the REAR-AUX input
(AUX NAME EDIT )
If you select the REAR-AUX input as audio
source, "AUXILIARY1 " appears on the dis-
play. To change this name:
In the AUX menu, press the rocker
switch
or = repeatedly until "AUX
NAME EDIT" appears on the display.
Note:
The menu item appears only if you acti-
vated the audio input (AUX ON).
Press the rocker switch
:, "AUXILIA-
RY1" is displayed.
You can now enter a new name with up to
14 characters:
The rocker switch
or : is used to
select the character to be changed.
Press the rocker switch
or = to
change the character. The character set
is being scrolled.
Press the MENU/OK button
< to fi n-
ish the text input and to store the name
entered.
•
•
쏅
쏅
쏅
쏅
쏅
Note:
To quit the text input without changing
the name, press the ESC/DIS
button
5.
FRONT-AUX input
Setting amplifi cation (AUX LEVEL )
You can perform a volume adjustment from
0 to 8 for a connected external device:
In the AUX menu, press the rocker
switch
or = repeatedly until "AUX
LEVEL" appears on the display.
Press the rocker switch
: to call up
the setting.
To change the setting, press the rocker
switch
or =.
Press the MENU/OK button
< to store
the set value.
쏅
쏅
쏅
쏅
02_BA_Hamburg_gb.indd 9802_BA_Hamburg_gb.indd 98 26.03.2007 11:34:06 Uhr26.03.2007 11:34:06 Uhr