107
User settings
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKA
User settings
These presettings can be adjusted to your
preferences:
Welcome text
Clock settings
Volume settings
Display settings
Scan time
Changing the welcome text
(ON MESSAGE )
When you switch on the device, an ani-
mation appears. It is factory set to "BLAU-
PUNKT". To change this text, call up the
Various menu:
Press the MENU/OK button
?.
Press the rocker switch
or =
until "VARIOUS MENU" appears on
the display.
VARIOUS MENU
USER MENU
CD
ROC
P
LA
MIX
RPT
Press the rocker switch : to open
the menu.
Press the rocker switch
or = re-
peatedly until "ON MESSAGE" appears
on the display.
Press the rocker switch
: to display
the text input.
You can now enter your own welcome text
with up to 9 characters:
•
•
•
•
•
쏅
쏅
쏅
쏅
쏅
The rocker switch
or : is used to
select the character to be changed.
Press the rocker switch
or = to
change the character. The alphabet is
being scrolled.
If you entered the wrong number, you
can delete the characters by pressing
and holding the rocker switch
or :.
Press the MENU/OK button
< to fi nish
the text input and to store the welcome
text entered.
Note:
To quit the text input without changing
the welcome text, press the ESC/DIS
button
5.
Changing the clock settings
(CLOCK MENU)
The following settings can be changed in the
Clock menu:
Switching time display on/off
(CLOCK ON/OFF)
Selecting 12h/24h time display
(12HR/24HR MODE)
Setting the time (CLOCK SET)
CLOCK MENU
USER MENU
CD
ROC
P
LA
MIX
RPT
To call up the Clock menu:
Press the MENU/OK button
?.
쏅
쏅
쏅
•
•
•
쏅
02_BA_Hamburg_gb.indd 10702_BA_Hamburg_gb.indd 107 26.03.2007 11:34:09 Uhr26.03.2007 11:34:09 Uhr
To Next Page
Loading...
Need help?
General
Weight and Dimensions
