108
User settings
Press the rocker switch or = re-
peatedly until "CLOCK MENU" appears
on the display.
Press the rocker switch
: to open
the menu.
The Clock menu appears.
Switching time display on/off
The time can be displayed while the de-
vice is switched off, if the vehicle ignition
is switched on. To switch this time display
on/off:
In the Clock menu, press the rock-
er switch
or = repeatedly until
"CLOCK ON/OFF" is displayed.
Press the rocker switch
or : to
change between these settings:
"CLOCK ON ": The time display is
switched on.
"CLOCK OFF": The time display is
switched off.
Note:
Note if you switched on the time display
(CLOCK ON):
When switching off the device, the
usual "Goodbye" animation does not
appear.
Key combinations, e.g. for calling the
Demo mode, are no longer possible.
쏅
쏅
쏅
쏅
•
•
•
•
Selecting 12h/24h time display
(12HR/24HR MODE )
The time can be displayed using the 12-hour
or 24-hour format.
In the Clock menu, press the rock-
er switch
or = repeatedly until
"12HR/24HR MODE " is displayed.
Press the rocker switch
or : to
change between these settings:
"12HR MODE": The 12-hour format
(am/pm) is switched on.
"24HR MODE": The 24-hour format
is switched on.
Setting the clock
In the Clock menu, press the rock-
er switch
or = repeatedly until
"CLOCK SET" is displayed.
Press the rocker switch
: to open
the menu.
The time is displayed.
Select the hours or minutes with the
rocker switch
or :.
Press the rocker switch
or = to
change the hours/minutes.
Press the MENU/OK button
< to fi nish
the input and store the time.
Note:
To fi nish the input without changing the
time, press the ESC/DIS
button 5.
쏅
쏅
•
•
쏅
쏅
쏅
쏅
쏅
02_BA_Hamburg_gb.indd 10802_BA_Hamburg_gb.indd 108 26.03.2007 11:34:09 Uhr26.03.2007 11:34:09 Uhr
To Next Page
Loading...
