16
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 6
8.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
Press and hold down the MENU/OK
button ; for longer than two sec-
onds.
The radio scans the next receivable station.
"SCAN" and the current frequency are inter-
mittently shown on the display.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU/OK button ;.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Press the MENU/OK button ;.
Press the
or button < repeat-
edly until "SCAN TIME" appears on the
display.
Press the MENU/OK button ; to open
the menu.
Set the desired scan time with the
or
button =.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD-changer as well as
MP3 mode.
Confi guring the display
In radio mode, you can choose between
various display options.
Memory bank or memory location and
frequency
Memory bank and time
To switch between the display options,
press the ESC/DIS button 5.
쏅
•
•
쏅
Radio mode
01_KingstonMP47_NRDS_eng.indd 1601_KingstonMP47_NRDS_eng.indd 16 2/8/07 7:05:45 PM2/8/07 7:05:45 PM
To Next Page
Loading...
