29
ENGLISH
To exit the menu,
press the ESC/DIS button 5.
Adjusting equalizer bass
(E-BASS)
You can select 1 of 4 bass frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz) and set the
quality factor between 1.0 and 2.0.
Note:
For further information on setting the
bass level, please read the section enti-
tled "Adjusting BASS" in this chapter.
Adjusting bass frequency and quality
factor
Press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeat-
edly until "ENHANCED" appears on the
display.
Press the MENU/OK button ;.
"E-BASS" appears on the display.
Press the
button 9 to open the
E-Bass menu.
"FREQ" and the current setting appear on
the display.
Press the
or button < to switch
between the setting options "FREQ"
(bass frequency) and "QFAC" (quality
factor).
Set the bass frequency and quality fac-
tor each with the
or button 7.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting equalizer middle
(E-MIDDLE)
You can select 1 of 4 middle frequencies
(0,5 Hz, 1 Hz, 1,5 Hz, 2,5 Hz) and set the
level for the selected frequency between -7
and +7. You can also set the quality factor
between 0.5 and 1.25.
Adjusting middle frequency, level and
quality factor
Press the AUDIO button 7.
"BASS" appears on the display.
Press the
or button < repeat-
edly until "ENHANCED" appears on
the display.
Press the MENU/OK button ;.
"E-BASS" appears on the display.
Press the
or button < repeat-
edly until "E-MIDDLE" appears on the
display.
Press the
button 9 to open the
E-Middle menu.
"GAIN" and the current setting appear on
the display.
Press the
or button < to switch
between "GAIN" (level), "FREQ" (mid-
dle frequency) and "QFAC" (quality
factor).
Set the level, middle frequency and
quality factor each with the
or
button 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
01_KingstonMP47_NRDS_eng.indd 2901_KingstonMP47_NRDS_eng.indd 29 2/8/07 7:05:47 PM2/8/07 7:05:47 PM
To Next Page
Loading...
