Blaupunkt Kingston MP47 - Clock - Time; Setting the Time; Selecting 12;24-Hour Clock Mode; Displaying the Time Continuously When the Device Is off and the Ignition Is on

26
Clock – Time
Setting the time
To set the time,
press the MENU/OK button ;.
Press the
or button < repeat-
edly until "CLOCK SET" appears on the
display.
Press the MENU/OK button ; to
open the menu.
The time appears on the display. The hours
and minutes can be adjusted.
Set the time with the
or button
<.
To switch between hours and minutes,
press the
or button 9.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
Selecting 12/24-hour clock
mode
Press the MENU/OK button ;.
Press the
or button < repeated-
ly until "24 H MODE" or "12 H MODE"
appears on the display.
Press the
or button 9 to switch
between the modes.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
press the MENU/OK button ;.
Press the
or button < repeat-
edly until "CLOCK OFF" or "CLOCK ON"
appears on the display.
Press the
or button 9 to switch
the display between CLOCK ON and
CLOCK OFF.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
쏅
쏅
쏅
쏅
Clock – Time
01_KingstonMP47_NRDS_eng.indd 2601_KingstonMP47_NRDS_eng.indd 26 2/8/07 7:05:47 PM2/8/07 7:05:47 PM