25
ENGLISH
Cancelling MIX
Press the 3 MIX button 8 once or sev-
eral times until "MIX OFF" is displayed.
The MIX symbol disappears from the dis-
play.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
press the MENU/OK button ; for
longer than two seconds.
The next track will then be scanned. "SCAN"
and the current track number are intermit-
tently shown on the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Stopping Scan
To stop scanning,
briefl y press the MENU/OK button
;.
The currently played track will then contin-
ue to be played normally.
Interrupting playback (PAUSE)
Press the button 5 8.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
5
8.
Playback is continued.
쏅
쏅
쏅
쏅
쏅
Confi guring the display
You can choose from various display op-
tions in CD changer mode:
Track number and playing time
Track number and time
CD number and track number
To switch between the display options,
press the ESC/DIS button 5 once or
several times until the desired display
appears.
•
•
•
쏅
CD-changer mode
01_KingstonMP47_NRDS_eng.indd 2501_KingstonMP47_NRDS_eng.indd 25 2/8/07 7:05:47 PM2/8/07 7:05:47 PM
To Next Page
Loading...
