24
CD-changer mode
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
Switching to CD changer mode
Press the SOURCE button = repeat-
edly until "CDC / AUX" appears on the
display.
The device starts playing the fi rst CD that
the CD changer detects.
Selecting CDs
To move up or down to another CD,
press the
or < button once or
several times.
Note:
The device will ignore empty CD slots
in the changer and slots containing
invalid CDs.
Selecting tracks
To move up or down to another track on
the current CD,
press the
or 9 button once or
several times.
Fast seek tuning (audible)
To fast search backwards or forwards,
press and hold down the
or but-
ton 9 until fast searching backwards/
forwards begins.
쏅
쏅
쏅
쏅
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
press the 4 RPT button 8 once or
several times until "RPT TRACK" is dis-
played.
The display shows the RPT symbol.
To repeat the current CD,
press the 4 RPT button 8 once or
several times until "RPT DISC" is dis-
played.
The display shows the RPT symbol.
Cancelling Repeat
To stop the current track or current CD from
being repeated,
press the 4 RPT button 8 once or sev-
eral times until "RPT OFF" is displayed.
The RPT symbol disappears from the
display.
Random track play (MIX)
To play the tracks on the current CD in ran-
dom order,
press the 3 MIX button 8 once or sev-
eral times until "MIX CD" is displayed.
The display shows the MIX symbol.
To play the tracks on all inserted CDs in ran-
dom order,
press the 3 MIX button 8 once or sev-
eral times until "MIX ALL" is displayed.
The display shows the MIX symbol.
쏅
쏅
쏅
쏅
쏅
CD-changer mode
01_KingstonMP47_NRDS_eng.indd 2401_KingstonMP47_NRDS_eng.indd 24 2/8/07 7:05:46 PM2/8/07 7:05:46 PM
To Next Page
Loading...
