35
ENGLISH
Restoring factory settings
(Normset)
You can restore the original factory settings
of the device.
Press the MENU/OK button ;.
Press the
or button < repeat-
edly until "NORMSET" appears on the
display.
Press the MENU/OK button ; repeat-
edly until "NORM ON" appears on the
display.
The device switches off and immediately
on again. All settings are returned to the
factory settings.
Note:
If you do not press and hold the MENU/
OK button ; long enough, "NORM
OFF" appears on the display. In this
case, your individual settings remain
intact and the device remains switched
on. You can exit the menu with the
ESC/DIS button 5.
쏅
쏅
쏅
Factory settings:
Power-on volume
(ON VOL)
LAST VOL
Volume of muting
(MUTE LEVEL)
0
Volume of telephone/
navigation announce-
ment (TEL VOL)
10
Seek tuning sensitivity
(SENS)
HI
Scan time (SCAN TIME) 10
Time display (CLOCK) OFF
Time (CLOCK SET) 12:00
Time display mode
(CLOCK MODE)
12H
Confi rmation beep
(BEEP)
ON
Display brightness DIM DAY 15,
DIM NIGHT
12
Factory settings
01_KingstonMP47_NRDS_eng.indd 3501_KingstonMP47_NRDS_eng.indd 35 2/8/07 7:05:49 PM2/8/07 7:05:49 PM
To Next Page
Loading...
