Blaupunkt Kingston MP47 - Scanning Tracks (SCAN); Repeating Individual Tracks or Whole Directories (REPEAT); Interrupting Playback (PAUSE)

23
ENGLISH
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the MP3 data carrier.
Press the MENU/OK button ; for
longer than two seconds.
The next track will then be scanned. "SCAN"
and the current track name are intermit-
tently shown on the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
Briefl y press the MENU/OK button
;.
The currently scanned track will then con-
tinue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
To play the current track repeatedly,
press the 4 RPT button 8 once or
several times until "RPT TRACK" is dis-
played.
The display shows the RPT symbol.
To repeat the whole directory,
press the 4 RPT button 8 once or sev-
eral times until "RPT DIR" is displayed.
The display shows the RPT symbol.
쏅
쏅
쏅
쏅
Cancelling Repeat
To stop the current track or current direc-
tory from being repeated,
press the 4 RPT button 8 once or sev-
eral times until "RPT OFF" is displayed.
The RPT symbol disappears from the dis-
play.
Interrupting playback (PAUSE)
Press the button 5 8.
"PAUSE" appears on the display.
Cancelling pause
During the pause, press the button
5
8.
Playback is continued.
쏅
쏅
쏅
MP3/WMA mode
01_KingstonMP47_NRDS_eng.indd 2301_KingstonMP47_NRDS_eng.indd 23 2/8/07 7:05:46 PM2/8/07 7:05:46 PM