47
ENGLISH
do not use mix-mode CDs contain-
ing both CD-audio tracks and MP3
tracks. If you try playing a mix-mode
CD, the device will only play the CD-
audio tracks.
MP3 ID3 tags
MP3 tracks can contain additional infor-
mation such as the artist, album and track
name (ID3 tags). This device can display
ID3 tags of version 1 and 2.
Switching to MP3 mode
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
Note
If an MP3 or WMA CD is located in the
drive, the display shows "MP3" during
MP3 mode.
Confi guring the display
The following settings require that an MP3
CD is in the device.
Notes:
You can change the display for time,
station set last and PTY function set
last only if RDS is switched on in the
menu.
The display changes for 5 seconds.
•
•
•
Confi guring the default display
You can display various types of informa-
tion on the current track:
Time
Track
Name of artist
Genre
Station set last
PTY function set last
File name
To switch between the different display
options,
press the DIS button 8 repeatedly
until the desired display appears.
Selecting a directory
To move up or down to another directory,
press the
or button 2 once or
several times.
Selecting tracks/fi les
To move up or down to another track or fi le
in the current directory,
press the
? or button @ once
or several times.
If you press the
button @ once, the
current track will be played again from the
beginning.
Fast searching (audible)
To fast search forwards or backwards,
press and hold down the
? or
button @ until fast searching back-
wards or forwards begins.
•
•
•
•
•
•
•
쏅
쏅
쏅
쏅
MP3/WMA mode
02MilSRemMCarlMP28_gb.indd 4702MilSRemMCarlMP28_gb.indd 47 30.01.2008 11:26:12 Uhr30.01.2008 11:26:12 Uhr
To Next Page
Loading...
Need help?
General
