Blaupunkt Monte Carlo MP28 User Manual

52
Equalizer presettings (presets)
This device features an equaliser in which
the settings for "FLAT" (linear) and the mu-
sic genres "CLASSICS", "POP M" and "ROCK
M" are already programmed.
To select an equaliser setting,
press the AUD button : repeatedly
until "FLAT", "CLASSICS", "POP M",
"ROCK M" or "DSP OFF" appears on the
display.
Turn the volume control 5 to select
one of the settings or select "DSP OFF"
to switch off the equaliser.
When you have fi nished making your chang-
es,
wait 5 seconds.
The settings are saved.
The respective setting appears on the dis-
play.
Note:
Without equaliser presets, you can
adjust the bass and treble from -10 to
+10.
If you change the treble and/or bass
while an equalizer presetting (POP M,
ROCK M, CLASSICS, FLAT) is selected,
the equaliser switches off automatical-
ly (DSP OFF).
쏅
쏅
쏅
External audio sources
External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device via the
AUX input.
Notes:
To connect an external audio source
via the rear or front AUX input (de-
pending on the model), you need a
cable with cinch plugs (rear AUX in-
put) or a 3.5-mm jack plug (front AUX
input).
The AUX input can be selected with
the SRC button 4. "AUX" appears
on the display.
•
•
Sound External audio source
02MilSRemMCarlMP28_gb.indd 5202MilSRemMCarlMP28_gb.indd 52 30.01.2008 11:26:12 Uhr30.01.2008 11:26:12 Uhr

Blaupunkt Monte Carlo MP28 Specifications

General

Brand	Blaupunkt
Model	Monte Carlo MP28
Category	Car Receiver
Language	English