Blaupunkt Monte Carlo MP28 User Manual

32
About these instructions
About these instructions
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
Read these instructions carefully and
completely before using the device.
Keep the instructions at a location so
that they are always accessible to all
users.
Always pass on the device to third par-
ties together with these instructions.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Symbols used
These instructions employ the following
symbols:
CAUTION!
Warns about laser beam
DANGER!
Warns about injuries
CAUTION!
Warns about damaging the CD
drive
The CE mark confi rms the compli-
ance with EU directives.
Identifi es a sequencing step
Identifi es a listing
•
•
•
쏅
•
Use as directed
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
Declaration of conformity
The Blaupunkt GmbH declares that the de-
vice complies with the basic requirements
and the other relevant regulations of the di-
rective 89/336/EWG.
02MilSRemMCarlMP28_gb.indd 3202MilSRemMCarlMP28_gb.indd 32 30.01.2008 11:26:09 Uhr30.01.2008 11:26:09 Uhr

Blaupunkt Monte Carlo MP28 Specifications

General

Brand	Blaupunkt
Model	Monte Carlo MP28
Category	Car Receiver
Language	English