35
ENGLISH DEUTSCH
Note:
If the vehicle ignition was switched off
before you inserted the CD, you will
first have to switch on the device by
pressing button 1 in order to start play-
ing the CD.
Switching on/off using the removable
control panel
Remove the control panel.
The unit switches off.
Attach the control panel again.
The unit switches on. The settings (radio,
CD/MP3, CD changer or AUX) that were
set before the unit was switched off will be
reactivated.
쏅
쏅
Adjusting the volume
You can adjust the volume in steps from 0
(off) to 66 (maximum).
To increase the volume,
press the
button 4.
To decrease the volume,
press the button 4.
Setting the power-on volume
Note:
The device is equipped with a timeout
function.
If, for instance, you press the MENU
button 7 and select a menu item, the
device will switch back approx. 8 sec-
onds after the last button was pressed.
Any changes to the settings that you
have made will be saved.
You can set the power-on volume.
Press the MENU button 7.
Press the
or button 8 repeat-
edly until “ON VOLUME” appears in the
display.
Adjust the power-on volume using the
buttons 8.
To help you adjust the setting more easily, the
device will increase or decrease the volume
as you make your changes.
If you change the setting to “LAST VOL”, the
volume level that was set the last time you
switched off the device will be activated
again.
쏅
쏅
쏅
쏅
쏅
Adjusting the volumeSwitching on/off
02_MunchenMP36_eng.indd 3502_MunchenMP36_eng.indd 35 17.03.2006 9:32:23 Uhr17.03.2006 9:32:23 Uhr
To Next Page
Loading...
Need help?
General
