44
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button ;.
“RPT TRCK” appears briefl y in the display
and the RPT symbol lights up. The track is
repeated continuously until you deactivate
RPT.
Cancelling REPEAT
If you want to cancel the repeat function,
press the 4 RPT button ; again.
“RPT OFF” appears briefl y in the display and
the RPT symbol is disappears. Playback is
resumed.
Pausing playback (PAUSE)
Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
Press button 3
; whilst pause is
activated.
Playback is resumed.
Confi guring the display
You can choose between two display types
for CD mode:
Track number and clock time
Track number and playing time
Press the MENU button 7.
Press the
or button 8 repeatedly
until “CD DISP” appears in the display.
쏅
쏅
쏅
쏅
•
•
쏅
쏅
Random track play (MIX)
Press the 5 MIX button ;.
“MIX CD” appears briefl y in the display and
the MIX symbol lights up. The next randomly
selected track will then be played.
Cancelling MIX
Press the 5 MIX button ; again.
“MIX OFF” appears briefl y in the display and
the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press and hold down the MENU button
7 for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For fur-
ther details, please read the section
entitled “Setting the scanning time” in
the “Radio mode” chapter.
Cancelling SCAN and continuing listening
to a track
To cancel scanning, press the MENU
button 7.
The currently scanned track will then con-
tinue to be played normally.
쏅
쏅
쏅
쏅
CD mode
02_MunchenMP36_eng.indd 4402_MunchenMP36_eng.indd 44 17.03.2006 9:32:25 Uhr17.03.2006 9:32:25 Uhr
To Next Page
Loading...
Need help?
General
