To Next Page

To Previous Page

The RDS function is active when the RDS

symbol is shown in the display.

Switching REGIONAL on/off

Press the MENU button 7.

Press the or button 8 repeatedly

until “REG” appears in the display. “OFF”

or “ON” is displayed alongside “REG”.

To switch REGIONAL on/off,

press the

or button 8.

Press the MENU button 7.

Selecting the waveband /

memory bank

You can use this device to receive pro-

grammes broadcast over the FM frequency

range as well as the MW and LW (AM) wave-

bands. There are three memory banks avail-

able for the FM waveband (FM1, FM2 and

FMT) and one for each of the MW and LW

wavebands. Six stations can be stored in

each memory bank.

To switch between the FM memory banks

(FM1, FM2 and FMT) and the MW and LW

wavebands,

brieﬂ y press the BND•TS button <.

Tuning into a station

There are various ways of tuning into a sta-

tion.

Automatic station seek tuning

Press the

or button 8.

The radio tunes into the next receivable sta-

tion.

쏅

Tuning into stations manually

You can also tune into stations manually.

Note:

You can only tune into stations manually

if the RDS function is deactivated.

Press the

or button 8.

Browsing through broadcasting

networks (only FM)

If radio stations provide several programmes,

you have the option of browsing through

their “broadcasting networks”.

Note:

The RDS function must be activated

before you can use this feature.

Press the

or button 8 to switch

to the next station on the broadcasting

network.

Note:

When using this feature, you will only be

able to switch to stations that you have

received once before already. To receive

the stations, use the scan function or the

Travelstore function.

Setting the sensitivity of station

seek tuning

You can choose whether the radio should

only tune into stations providing good recep-

tion or whether it can also tune into those

with a weak reception.

Press the MENU button 7.

Press the

or button 8 repeatedly

until “SENS” and the currently set value

appear in the display.

“SENS HI6” means that the tuner is set to the

highest sensitivity setting. “SENS LO1” means

it is set to the lowest sensitivity setting.

쏅

Radio mode

02_MunchenMP36_eng.indd 3802_MunchenMP36_eng.indd 38 17.03.2006 9:32:24 Uhr17.03.2006 9:32:24 Uhr

Brand	Blaupunkt
Model	MUNCHEN MP36
Category	Car Receiver
Language	English

Blaupunkt MUNCHEN MP36 User Manual

Table of Contents

Questions and Answers:

Blaupunkt MUNCHEN MP36 Specifications

Related product manuals