52
Clock time
Displaying the clock time
To display the clock time briefl y,
press and hold down the SRC
but-
ton = until the clock time appears in
the display.
Setting the clock time
To set the clock time,
press the MENU button 7.
Press the or button 8 repeat-
edly until “CLOCK SET” appears in the
display.
Press the
button 8.
The clock time appears in the display. The
hours fl ash and can be adjusted.
Adjust the hours using the
but-
tons 8.
Once the hours are set,
press the
button 8.
The minutes fl ash.
Adjust the minutes using the but-
tons 8.
Press the MENU button 7 twice.
Selecting 12/24-hour clock
mode
Press the MENU button 7.
“MENU” appears in the display.
Press the
or button 8 repeatedly
until “24 H MODE” or “12 H MODE” ap-
pears in the display.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Clock time
Press the or button 8 to switch
between the modes.
When you have fi nished adjusting the set-
ting,
press the MENU button 7.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off and
the vehicle ignition is on,
press the MENU button 7.
“MENU” appears in the display.
Press the
or button 8 repeatedly
until “CLOCK OFF” or “CLOCK ON” ap-
pears in the display.
Press the
or button 8 to switch
between the ON/OFF settings.
When you have fi nished adjusting the set-
ting,
press the MENU button 7.
Briefl y displaying the time when
the device is switched off
To display the time briefl y when the device
is off,
press the SRC button =.
The time is displayed for approx. 8 sec-
onds.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_MunchenMP36_eng.indd 5202_MunchenMP36_eng.indd 52 17.03.2006 9:32:26 Uhr17.03.2006 9:32:26 Uhr
To Next Page
Loading...
Need help?
General
