Blaupunkt MUNCHEN MP36 - Random Track Play (MIX); Scanning All the Tracks on All the Cds (SCAN); Pausing Playback (PAUSE)

51
ENGLISH DEUTSCH
Cancelling REPEAT
To stop the current track or current CD from
being repeated,
briefl y press the 4 RPT button ;.
“RPT OFF” appears and RPT disappears from
the display.
Random track play (MIX)
To play the tracks on the current CD in ran-
dom order,
briefl y press the 5 MIX button ;.
“MIX CD” appears briefl y in the display and
MIX is displayed.
To play the tracks on all the inserted CDs in
random order,
press and hold down the 5 MIX button
; for longer than two seconds.
“MIX ALL” appears briefl y in the display and
MIX is displayed.
Cancelling MIX
Briefl y press the 5 MIX button ;.
“MIX OFF” appears and MIX disappears from
the display.
Scanning all the tracks on all the
CDs (SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
press and hold down the MENU button
7 for longer than two seconds.
“TRK SCAN” appears in the display and the
number of the current track fl ashes.
쏅
쏅
쏅
쏅
쏅
Cancelling SCAN
To stop scanning,
briefl y press the MENU button 7.
The currently scanned track will then con-
tinue to be played normally.
Note:
You can set the scanning time. For fur-
ther details, please read the section
entitled “Setting the scanning time” in
the “Radio mode” chapter.
Pausing playback (PAUSE)
Press button 3 ;.
“PAUSE” appears in the display.
Cancelling pause
Press button 3
; whilst pause is
activated.
Playback is resumed.
쏅
쏅
쏅
CD-changer mode
02_MunchenMP36_eng.indd 5102_MunchenMP36_eng.indd 51 17.03.2006 9:32:26 Uhr17.03.2006 9:32:26 Uhr