INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEXSETUPCD CHANGER
24
6 Press the OK button 8 to accept the town as your destination.
If there are multiple instances of the town’s name, a submenu will open. You
can then select the required town from it.
If you do not want to accept the town as your destination,
1 press the ESC button <.
✔ You will return to the speller.
Once you have entered the town, you will continue with DEST. ENTRY. Now
choose between:
- STREET: to enter the destination street. Whether a street can be entered
as a destination depends on the data stored on your navigation CD.
- CENTRE: to select a town centre or centre of a town district as your des-
tination.
- DEST. SURROUND: you can directly select special destinations from a
list classified in categories (e.g. motorway junction, train station, shop-
ping centre, etc.) within the vicinity of the destination. To do so, read the
section entitled “Special destinations, destination surrounding area”.
A requirement is that the appropriate data are available on the navigation CD. If
there are no data available for individual items, they will be marked with a lock
symbol and cannot be selected.
Entering a destination – street, junction and house number
If you want to drive to a street in a town that you have already entered, you can
also select STREET from the destination input menu in navigation mode.
TIP: To make your search easier, long street names can also be stored
in different ways, e.g. RAABE-WEG, WILHELM- and WILHELM-RAABE-
WEG.
DEST. ENTRY
CENTRE
STREET
DEST. SURROUND
Subsequent destination input menu, “city” has been
entered
DEST. ENTRY
CENTRE
STREET
CITY
P.O.I.
Destination input menu
To Next Page
Loading...
