14
Navigation
Entering a destination address
Touch the Destination entry button to enter
a destination for the navigation.
The Destination entry menu is displayed.
Touch the Address button.
The Address menu is displayed.
Touch the City or Postal code button.
The software keyboard is displayed.
The software keyboard allows for entering the
names of cities or streets as well as postal codes.
More information can be found in the chapter
"Controls".
Type the name of the city to which you want
to navigate using the software keyboard by
touching the letter buttons in sequence. Op-
tionally, you can also enter the postal code.
Touch the OK button.
The Address menu is displayed.
If you want to enter a street name:
Touch the Street button.
Enter the street name using the software key-
board.
If you want to enter a house number:
Touch the No button.
The software keyboard is automatically dis-
played as numeric keypad.
Enter the House number using the software
keyboard.
Touch the Start Navigation button.
The navigation starts.
The destination guidance is displayed.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Navigating to a point of interest
The points of interest or POIs include interest spe-
cifi c locations such as airports, railway stations,
and garages. These points of interest are stored in
the map material and can be used as a navigation
destination.
Selecting a point of interest
In the main menu of the Lucca, touch the
Navigation button.
The Navigation menu is displayed.
Touch the Point of interest button to select a
special destination for the navigation.
The Point of interest menu is displayed.
You can now select one of the following points
of interest:
Airport
Filling station
Railway station
Car dealer
Restaurant
Note:
Touch the More button to call up additional
points of interest, such as port, trade fair or
bank. The desired point of interest us selected
by touching it.
Touch one of the symbols to navigate to the
respective point of interest.
You can now select whether you want to navigate
to a point of interest in your vicinity or at a specifi c
location.
Selecting a point of interest nearby
If you want to navigate to a point of interest in your
vicinity:
Touch the ... nearby button.
Note:
This function is only available if a GPS signal
is received.
쏅
쏅
•
•
•
•
•
쏅
쏅
Lucca_5_2_long_1_GB.indd Sec1:14Lucca_5_2_long_1_GB.indd Sec1:14 07.12.2006 11:26:42 Uhr07.12.2006 11:26:42 Uhr
To Next Page
Loading...
