Confi guring Lucca
37
2D auto zoom
Select whether you desire
Low autozoom,
Standard autozoom, High autozoom or No
autozoom as default in 2-D view during a
navigation.
Note:
For 2-D and 3-D auto zoom, the zoom depth
is changed in reference to your speed: If you
travel slowly, the scale becomes smaller. If
you travel faster, the scale becomes larger.
The deeper the auto zoom, the smaller the
scale of the map.
2D-view
Select whether the map should be ori-
ented to the north or in driving direction
by default during a navigation with 2-D
view.
On the second page of the Settings menu,
touch the Auto mode button.
The Aut
o mode menu is displayed.
T
ouch the buttons to perform the settings.
Touch OK
.
Unit of measure
In the Unit of measure menu, you can defi ne the
units of measure to be used for time and dis-
tance.
On the second page of the Settings menu,
touch the Unit of measure button.
The Unit of measur
e menu is display
ed.
Time
Touch this fi
eld to toggle between 12-hour
and 24-hour display.
Distance
Touch this fi eld to toggle between the display
in kilometres and miles.
Touch OK.
•
–
•
–
쏅
쏅
쏅
쏅
•
쏅
•
쏅
쏅
Display
In the Display menu, you can set the display bright-
ness for day and night operation.
On the second page of the Settings menu,
touch the Display button.
The Displa
y menu is displayed.
Brightness day
Touch this fi
eld to set the display brightness
for day operation and confi rm with OK.
Brightness night
Touch this fi eld to set the display brightness
for night operation and confi rm with OK.
Volume
In the Volume menu, you can set the volume.
On the second page of the Settings menu,
touch the Volume button.
The V
olume menu is displayed.
Touch the
Volume fi eld and select a different
value.
Touc
h OK.
Voice output
In the Voice output menu, you can select whether
the voice output should also use the loudspeakers
if a Connect Cradle is connected. The active audio
source of the car sound system is muted during a
voice output.
On the third page of the Settings menu, touch
the Voice output button.
The V
oice output menu is displayed.
Touch the
Radio mute button t
o toggle be-
tween the voice output via loudspeakers (but-
ton with check mark) and the voice output
only via Lucca (button without check mark).
Touch OK.
쏅
•
쏅
•
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Lucca_5_2_long_1_GB.indd 37Lucca_5_2_long_1_GB.indd 37 07.12.2006 11:26:49 Uhr07.12.2006 11:26:49 Uhr
To Next Page
Loading...
