Navigation
19
Additional functions
Touch the Mor
e button to gain access to addi-
tional functions of the Favourites menu.
The list of additional functions displays. It
contains the following functions:
Touch the Show details button to show the
address of the selected destination.
Touch the Delete entry button to delete the
selected destination.
Touch the Delete all button to delete all desti-
nations from the Favourites.
For further details read the chapter "Deleting a
destination".
Renaming an entry
Touch the Rename entry button to
change the designation of the selected
destination.
Copying one of the recent
destinations
The destinations approached last are automati-
cally stored in the Recent destinations list.
You can perform the following in this list:
Accepting a destination for the navigation,
saving a navigation destination in the Favour-
ites, and
deleting entries of the Recent destinations
list.
In the main menu touch the Navigation button.
The Navigation menu is displayed.
Touch the Destination entry button.
The Destination entry menu is displayed.
Touch the Recent destinations button.
The Recent destinations menu is displayed.
Touch the desired destination.
Touch the OK button.
The destination is copied and the address is
entered in the corresponding fi elds.
쏅
쏅
쏅
쏅
•
–
•
•
•
쏅
쏅
쏅
쏅
쏅
Additional functions
Touch the More button to gain access to ad-
ditional functions of the Recent destinations-
menu.
The list of additional functions displays.
It contains the following functions:
Delete entry:
Touch the Delete entry button to delete
the selected destination.
Delete all:
Touch the Delete all button to delete all
entries of the Recent destinations list.
Save in favourites:
Touch the Save in favourites button to
save the selected destination in the Fa-
vourites.
Using home address as destination
If your home address is saved, you can quickly navi-
gate home from any location contained in your map.
How to save your home address is described in
the chapter "Home address".
In the main menu touch the Navigation button.
The Navigation menu is displayed.
Touch the Home button.
The route calculation is performed and the
navigation starts.
Note:
The route type used for the route calculation is
automatically selected from the setting which
you defi ned in the Routing options menu.
쏅
•
–
•
–
•
–
쏅
쏅
Lucca_5_2_long_1_GB.indd 19Lucca_5_2_long_1_GB.indd 19 07.12.2006 11:26:43 Uhr07.12.2006 11:26:43 Uhr
To Next Page
Loading...
