42
Connect Cradle
Connect Cradle
The Connect Cradle allows you
to transfer a composite video
signal (back-up camera, DVD
player).
The 4-pole 3.5-mm jack con-
nector contains one audio and
video input. As soon as a signal
is present at the Connect Cradle and the Lucca
is installed in the Connect Cradle, the image and
sound of the source is shown on the display of the
Lucca (Lucca must be switched on).
Pin assignment D-sub Connect Cradle
Pin Type Description
1
6 10
11
5
15
1 Ignition IN Car ignition signal IN (12V)
2 GND GND
3 GND GND
4 Analog OUT left Audio line OUT left channel
5 GND TMC Return TMC antenna Ground
6 Battery Plus 12/24 V DC Power IN
7 Speed Pulse Signal Continue nav. in case of GPS signal lost (5V)
8 TMC IN Car Audio TMC Signal IN (3.7-5V)
9 Analog OUT right Audio line OUT right channel
10 TMC-Antenna TMC signal Antenna (75-cm wire antenna)
11 GND GND
12 Dimming IN Illumination Signal IN (12V)
13 TMC-OUT Car Audio TMC Signal OUT (3.7-5V)
14 Audio mute Audio mute OUT (5V)
15 Analog GND GND
Lucca_5_2_long_1_GB.indd Abs3:42Lucca_5_2_long_1_GB.indd Abs3:42 07.12.2006 11:26:50 Uhr07.12.2006 11:26:50 Uhr
To Next Page
Loading...
