DANSK
49
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Adjusting the volume
The volume can be adjusted in steps
from 0 (off) to 50 (maximum).
➮ To increase the volume, turn the
volume control 2 to the right.
➮ To decrease the volume, turn the
volume control 2 to the left.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “ON VOLUME” appears in
the display.
➮ Set the power-on volume using the
and buttons :.
Note:
● To protect your hearing, the power-
on volume is limited to a value of
“40”.
When you have finished making your
changes,
➮ press the MENU button 8 or OK
; twice.
Instantaneously reducing the
volume (mute)
This feature allows you to instantane-
ously reduce the volume (mute).
➮ Briefly press button 3.
“MUTE” appears in the display.
Switching on/off
There are various ways of switching the
unit on/off:
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button 3, it will switch on/off
simultaneously with the ignition.
You can switch the unit on even if the
ignition is off:
➮ To do so, press button 3.
Note:
● To protect the vehicle battery, the
unit will switch off automatically af-
ter one hour if the ignition is off.
Switching on/off using the
removable control panel
➮ Remove the control panel.
The unit switches off.
➮ Attach the control panel again.
The unit switches on. The last settings
(radio, CD, CD changer or AUX) will be
reactivated.
Switching on/off using button 3
➮ To switch the unit on, press button
3.
➮ To switch the unit off, press button
3 for longer than two seconds.
The unit switches off.
SWITCHING ON/OFF ADJUSTING THE VOLUME
To Next Page
Loading...
