72
Deactivating REPEAT
To stop the current track or current di-
rectory from being repeated,
➮ keep pressing the 4 RPT button >
until “REPEAT OFF” appears brief-
ly in the display.
Pausing playback (PAUSE)
➮ Press button 3 >.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 > while in
pause mode.
Playback is resumed.
Setting the display
There are various options available for
displaying the name of the artist, track,
directory and file.
➮ Repeatedly press the / DIS but-
ton 7 for longer than two seconds
until the required display appears.
Programming favourite tracks
for an MMC
Using the TPM function (Track Program
Memory), you can program and play
your favourite tracks for a particular
MMC. Programming is carried out in the
same way as described in “Program-
ming your favourite tracks for an MP3-
CD” in the “MP3 mode” chapter.
CD changer mode
Note:
● Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
Switching to CD changer mode
➮ Keep pressing the SOURCE but-
ton @ until “CHANGER” appears
in the display.
Playback begins with the first CD that
the CD changer detects.
Selecting CDs
➮ To move up/down from one CD to
another, press the
or button
: once or several times.
Selecting tracks
➮ To move up/down from one track to
another on the current CD, press
the
or button : once or sev-
eral times.
Fast searching (audible)
To fast search backwards or forwards,
➮ keep one of the buttons :
pressed until fast searching back-
wards / forwards begins.
Changing the display
➮ To switch between the track
number and clock display / track
number and playing time display /
CD number and track number dis-
play, press the
/ DIS button 7
once or several times for longer
MMC MODE CD CHANGER MODE
To Next Page
Loading...
