DANSK
57
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮ Press the or button :.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
➮ Press the or button :.
Note:
● You can only tune into stations
manually if the RDS function is de-
activated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
➮ Press the or button : to
move to the next station on the
broadcasting network.
Note:
● The RDS function must be activat-
ed before you can use this feature.
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use the Scan or Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “SENS” appears in the dis-
play.
➮ Press the button :.
The display shows the currently set sen-
sitivity level. “SENS HI6” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting. If “SENS
LO” is selected, lo lights up in the dis-
play.
➮ Set the required sensitivity using
the
and buttons :.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
Storing stations
Storing stations manually
➮ Select the required memory bank,
i.e. FM1, FM2, FM3, FMT, or one
of the MW or LW frequency rang-
es.
➮ Tune into the station you want to
listen to.
➮ Press one of the station buttons 1 -
5 > for longer than two seconds
to store the station to that button.
RADIO MODE
To Next Page
Loading...
