68
Selecting tracks
To move up or down to another track in
the current directory,
➮ keep pressing the or button :
until the number of the required
track appears in the display.
If the
button : is pressed once, the
current track will be played again from
the beginning.
Fast searching (audible)
To fast search backwards or forwards,
➮ keep one of the / buttons :
pressed until fast searching back-
wards / forwards begins.
Searching continues to the start or end
of the current track.
Random track play (MIX)
Mix directory
You can play all the tracks in the cur-
rent directory at random:
➮ Press button 5 MIX >.
The next randomly selected track in the
current directory will then be played.
Mix CD
You can play all the tracks on a CD at
random:
➮ Keep pressing the 5 MIX button >
until “MIX CD” appears in the dis-
play.
The next randomly selected track will
then be played.
Cancelling MIX
➮ Keep pressing the 5 MIX button >
until “MIX OFF” appears in the dis-
play.
The device plays track 1 in the current
directory.
Scanning tracks (SCAN)
You can briefly play all the tracks on the
CD.
➮ Press the OK button ; for longer
than two seconds. The next track
will then be played briefly.
Note:
● You can set the scanning time
(scantime). For further details,
please read the section entitled
“Setting the scantime” in the “Radio
mode” chapter.
Stopping SCAN and continuing
playback
➮ To stop scanning, press the OK
button ;.
The currently scanned track will then
continue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
If you want to repeat a track,
➮ press button 4 RPT >.
“REPEAT TRCK” appears briefly in the
display.
To repeat the whole directory,
➮ press the 4 RPT button > again.
“REPEAT DIR” appears briefly in the
display.
MP3 MODE