64
Note:
● You can set the scanning time
(scantime). For further details,
please read the section entitled
“Setting the scantime” in the “Radio
mode” chapter.
Stopping SCAN and continuing
playback
➮ To stop scanning, press the OK
button ;.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
➮ If you want to repeat a track, press
button 4 RPT >.
“REPEAT TRCK” appears briefly in the
display and the RPT symbol lights up.
The track is repeated until you deacti-
vate RPT.
Deactivating REPEAT
➮ If you want to stop the repeat func-
tion, press button 4 RPT > again.
“REPEAT OFF” appears briefly in the
display and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮ Press button 3 >.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 3 > while in
pause mode.
Playback is resumed.
Changing the display
➮ To switch between the track
number and clock display / track
number and playing time display,
press the
/ DIS button 7 once
or several times for longer than two
seconds until the required display
appears.
Traffic announcements in CD
mode
➮ If you want to receive traffic an-
nouncements whilst listening to a
CD, press the TRAFFIC button >.
Traffic announcement priority is active
when a traffic jam symbol lights up in
the display. For further details, read the
chapter entitled “Traffic information re-
ception”.
Naming CDs
The car radio allows you to assign
names for up to 30 CDs so that you can
recognise them more easily. The names
can be a maximum of eight characters
long.
If you try assigning more than 30 names,
“FULL” will appear in the display.
Entering / editing CD names
➮ Listen to the CD you wish to name.
➮ Press the MENU button 8.
➮ Press the and button : until
“CD NAME” appears.
➮ Press the or button :.
The name of the CD is displayed. If your
CD does not have a name yet, “DISC”
appears in the display.
CD MODE
To Next Page
Loading...
